Automotive Security Systems > remote car starter


Narrow by:
Narrow by Price Range
Store
  • Keyless Entry Remote
  • Alex NLD
  • Banggood
  • Autoplicity
  • CJ Pony Parts
  • Home Goods Center
  • Kotula's
  • Northern Tool
  • More...
  • Brand
  • SMART
  • Ford
  • Audiovox
  • Directed
  • Toyota
  • Chrysler
  • Nissan
  • Buick
  • More...
  • View: Grid  Grid  List  List  Text  Text
    Results 1 - 24 of about 1,500
     

    Audiovox Remote Car Starter and Keyless Entry System - 1, 500ft. Range, Model APS 57E, Port

    This Audiovox system allows you to remotely start your car from up to 1,500 feet away to warm it up in winter and cool it down in summer. Locks and unlocks doors, pops the trunk and turns the engine on/off using the 3-button remote 2 included. Programmable 5-60 minute run time and automatic cold start. Keyless Entry Yes, LCD Display No, Button Lock Yes, Temperature-sensing Start Programmable, Timer Variable, Turbo Charge Mode No, Works With Fuel injected vehicles w/automatic transmission, Starter Disable No, Diesel Start Capable Yes, Multi Function Remote Yes, Remote Included Yes, Range ft. 1,500. Includes five onboard relays for starting, accessory and parking lights Glass mount antenna includes built-in LED light and valet switch For use with vehicles with fuel injection and automatic transmissions can also work with hybrids Tach signal learning circuit Car finder mode DBI Port for Flashlogic bypass module Model Number: APS 57E. Age Group: Adult. More Info
    Manufacturer: : Audiovox
    Seller: Northern ToolFree Gift Card w/ Order
    $89.99
    (In stock)
     

    Audiovox Remote Automatic Car Starter and Keyless Entry System - 1000-Ft. Range

    Forget entering the automotive equivalent of an oven or freezer. This Audiovox system allows you to remotely start your car from up to 1000 feet away to warm it up in winter and cool it down in summer. It locks and unlocks doors, pops the trunk and turns the engine on/off using the 3-button remote (2 included). Programmable 5-60 minute runtime and automatic cold start. This feature-filled system also includes five onboard relays for starting, accessory and parking lights, and a glass mount antenna that includes built-in LED light and valet switch. The system works with vehicles with fuel injection and automatic transmissions; can also work with hybrids. More Info
    Manufacturer: : Audiovox
    Seller: Kotula'sFree Shipping on orders over $25
    $89.99
    (In stock)
     

    USA-PRO STARTER Factory OEM KEY FOB Keyless Entry Remote Alarm Replace

    This Key FOB fits many vehicles. Please see 'compatible vehicles' for list of compatible vehicles. Your vehicle may not be listed in the compatible vehicles however if the part number and fcc id number match your current remote then then it will work with your vehicle. If you have any questions please call 402-671-5100 There is some leg work you need to do before you purchase. Please read 'Read Before You Purchase' tab above before you purchase! Please also note you will need to program the remote to your vehicle. This can be done by researching the internet 'programming key fob' or taking to your local dealership. Self programming is not difficult. Also note that most key fobs have some wear on them. Also, if there is a metal key, it is cut and a new metal key will need to be cut. Batteries sold separately. 100% Money Back Guarantee! USA-PRO STARTER | BLUE LIGHT | 5 BUTTON | USA PRO | | More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $20.77
    (In stock)
     

    Code Alarm Keyless Car Remote Start Security Alarm System (Certified R

    Get that vehicle of yours started before you head out with the Certified Refurbished Code Alarm Keyless Car Remote Start Alarm System. Warm it up or lock it up thanks to this remote starter. It has countless features built in such as trunk release, fla More Info
    Manufacturer: : Audiovox
    Seller: VM Innovations
    $80.95
    (In stock)
     

    Spyke 1.4 kW Chrome with Starter Button Stealth Starter

    Spyke takes form to the level of function The same SuperTorque Starter the industry had relied on for years has a brand new shell with style Concealed bolts and minimal lines give way to a smooth sleek design like no other while maintaining the same great dependable gears and gear ratios Comes in polished chrome red and black The optional Krypto-9 Starter Drive has a 5-year limited warranty white/black One Size Fits Most Spyke 1.4 kW Chrome with Starter Button Stealth Starter Great for gifting during the holiday season. More Info
    Seller: J&P CyclesSpyke takes form to the level of function The same SuperTorque Starter the industry had relied on fo
    $543.99
    (In stock)
     

    433MHZ 5BUTTON STARTER Factory OEM KEY FOB Keyless Entry Remote Alarm Replace

    This Key FOB fits many vehicles. Please see 'compatible vehicles' for list of compatible vehicles. Your vehicle may not be listed in the compatible vehicles however if the part number and fcc id number match your current remote then then it will work with your vehicle. If you have any questions please call 402-671-5100 There is some leg work you need to do before you purchase. Please read 'Read Before You Purchase' tab above before you purchase! Please also note you will need to program the remote to your vehicle. This can be done by researching the internet 'programming key fob' or taking to your local dealership. Self programming is not difficult. Also note that most key fobs have some wear on them. Also, if there is a metal key, it is cut and a new metal key will need to be cut. Batteries sold separately. 100% Money Back Guarantee! 433MHZ 5BTN BLUE LED 433MHZ 5BTN BLUE LED | BLUE LED LIGHT | 433 MHZ | | 5BUTTON | | More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $24.77
    (In stock)
     

    Spyke 1.4 kW Chrome with Starter Button Stealth Starter

    Spyke takes form to the level of function The same SuperTorque Starter the industry had relied on for years has a brand new shell with style Concealed bolts and minimal lines give way to a smooth sleek design like no other while maintaining the same great dependable gears and gear ratios Comes in polished chrome red and black The optional Krypto-9 Starter Drive has a 5-year limited warranty white/black One Size Fits Most Spyke 1.4 kW Chrome with Starter Button Stealth Starter Great for gifting during the holiday season. More Info
    Seller: J&P CyclesSpyke takes form to the level of function The same SuperTorque Starter the industry had relied on fo
    $543.99
    (In stock)
     

    Car Alarm Engine Push Starter Supports One Key Start keyless Entry Remote Control

    Description: 1. A key to start the function (including the short 0.8-second start and press up to 3 seconds to activate the way, applies to all models). 2. Remote start function (when the remote start with 6 seconds ahead of preheating function with pump detection function, Smart Start 3 times). 3. The emergency release function (with emergency release switch, you can press an emergency release switch can lift anti-theft function, press 3 if you can directly start the vehicle, beneath the keys can be damaged when the button use, the first user-friendly design, greatly increasing product operability and ease of use of the vehicle). 4. Pump intelligent detection function (with remote start the pump when the detection function, when the remote start for the first time, the system will automatically detect the motor oil after 3 seconds, if the normal supply of the motor, the start and stop; if not normal system will be the second starting automatically detected again, up to three times the detection start, super intelligent design, the South and the North are common). 5. Remote start six seconds ahead of preheating function (when the remote start to preheat six seconds ahead, that give ACC, ON file to supply six seconds, six seconds and then start the car, when the benefits can be completed within 6 seconds of the engine reset delay function, it can ensure the stability of the vehicle quick start, remote start to increase the success rate) 6. 35 seconds after flameout automatic locking function host (when the owners every parking stall 35 seconds, the system will automatically lock the computer, instant key operation is invalid, required in order to start the car first before you can unlock once a key to start the car, greatly increasing Forgot vehicle safety when closed, reducing the chance of loss of vehicle) 7. Remote start 10 minutes after flameout timer function (when the remote start is successful, if the owner does not get on the train within 10 minutes hit the brakes, the vehicle that will automatically turn off the engine and lock the doors after a delay of 10 minutes; 10 minutes if the owner within the last car on the brakes, it means that the owners want to drive, the timing function is automatically canceled) 8. remote start security handbrake detection (in order to ensure the security of remote start, this product is designed with the handbrake detection function, that is, to pull the hand brake can remote start operation, does not pull the hand brake is not remotely start operation, greatly increased remote start security). 9. Driving automatic car lock function (this function is an additional function of the smart host, that is, when more than 15 seconds after the car hit the brakes, it will lock automatically lock, to ensure traffic safety) 10. flameout automatic lock function (this function is an additional function of the smart host, that is, when the owners turn off the host will automatically open lock, quick and convenient car convenience) 11. The automatic door sensor switch function (with remote control car approached automatically unlock leave the car automatically shut, safe and efficient way) 12. The car door alarm (when the host system into the security state, if this time the illegal car door, the car will be a long beep warning horn) 13. Remote start automatically lock function (after every remote start or remote start closed, the system will automatically lock the doors, to ensure the safety of vehicles) 14. The turn signal and speaker output (can output signal has a horn double flash control signal) 15. Remote trunk opening function (long press on the remote control unlock button for 3 seconds to open the trunk remote control function) 16. The three-dimensional sensing function (lock not jump, stable and reliable induction effect) Specification: Features: Durable,Portable Functions: Improve driving safety Material: ABS,Electronic Components,Metal Color: Black Package Included: More Info
    Seller: Alex NLD
    $121.39
    (In stock)
     

    CHX433TX CRIME STOPPER KEY FOB Keyless Entry Remote Alarm Clicker Starter

    This Key FOB fits many vehicles. Please see 'compatible vehicles' for list of compatible vehicles. Your vehicle may not be listed in the compatible vehicles however if the part number and fcc id number match your current remote then then it will work with your vehicle. If you have any questions please call 402-671-5100 There is some leg work you need to do before you purchase. Please read 'Read Before You Purchase' tab above before you purchase! Please also note you will need to program the remote to your vehicle. This can be done by researching the internet 'programming key fob' or taking to your local dealership. Self programming is not difficult. Also note that most key fobs have some wear on them. Also, if there is a metal key, it is cut and a new metal key will need to be cut. Batteries sold separately. 100% Money Back Guarantee! CHX433TX CRIME STOPPER | GREEN LIGHT | FCC ID: CHX433TX | CRIMESTOPPER | BLACK | 2 BUTTON More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $16.77
    (In stock)
     

    Smart Key Keyless Entry Systems For Cars Push Button Engine Start Stop Kits Remote Engine Starters

    Description: 1.Main unit with 4 jumper wires supporting the functions of remote start,protection car,and start time selection. 2.PCB coated the protection,waterproof,dust-proof and static proof. How to use it: 1.Push the button to start/stop the car engine. Push the button once, ACC is on, push the button twice,the engine is on, push the button again,ACC is off. 2.Remote start the car engine(when push the remote start, the smart button is lighting and ACC is on; then you push the remote stop,the engine is on.) Package Included: 1 X Main Unit 1 X Start/Stop Button 1 X Starer Wiring 1 X Manual Specification: Package Size 18*14*5cm Weight 0.33kg Material ABS Compatible Universal More Info
    Manufacturer: : SMART
    Seller: Alex NLD
    $37.95
    (In stock)
     

    25854935 CADILLAC REMOTE 1 Factory OEM KEY FOB Keyless Entry Car Remote Replace

    This is a Factory OEM (Original Equipment Manufacturer) Cadillac 5 Button keyless entry remote, aka key fob. Factory OEM key fob with a new uncut key. You will receive one of the listed interchangeable part numbers. Compatibility Cadillac 2014 Cadillac CTS 2013 Cadillac CTS 2012 Cadillac CTS 2011 Cadillac CTS 2011 Cadillac STS 2010 Cadillac CTS 2010 Cadillac STS 2009 Cadillac CTS 2009 Cadillac STS 2008 Cadillac CTS 2008 Cadillac STS Programming There are 2 different programming procedures. PROCEDURE #1-You have one programmed remote and want to add another. 1. Vehicle must be off. 2. Place the working remote(s) in the cupholder. Have the new remote with you. 3. Insert the key into the key lock cylinder located on the outside of drivers door. 4.Turn the key to the unlock position five times with in five seconds. 5. The (DIC) Driver Information Center displays Ready to Learn Electronic key #2, 3 or 4 6. Place the new remote into the transmitter pocket with the buttons facing the front of the vehicle. (The transmitter pocket is inside the center console between the driver and front passanger seats). 7. A beep sounds once the remote is programmed. The DIC displays Ready to Learn Electronoic Key #3 or 4, Or Maximum # Electronic Keys Learned. 8. Press the ignition control knob to exit programming mode. 9. Remove the remote from the transmitter pocket and press unlock to the remote two times. 10. To program additional remotes, repeat Steps 6 through 9. PROCEDURE #2-You have no working remotes. 1. The vehicle must be off. 2. Place the new remote into the transmitter pocket with the buttons facing the front of the vehicle. (The transmitter pocket is inside the center console between the driver and front passanger seats). 3. Insert the key into the key lock cylinder located on the outside of drivers door. 4.Turn the key to the unlock position five times with in five seconds. 5. The (DIC) Driver Information Center displays Ready to Learn Keys. 6. Press the ignition switch in. 7. The DIC reads Learn Delay Active Wait XX Min and counts down to zero. 8. The DIC displays Press Start Control To Learn Keys again. 9. Press the ignition switch in again. 10. Repeat Steps 7, 8 and 9 11. The DIC reads Learn Delay Active Wait XX Min and counts down to zero. 12. A beep sounds and the DIC reads Ready To Learn Electronic Key # X. All previously known remote programming has been erased. 13. A beep sounds once programming is complete. The DIC displays Ready To Learn Electronic Key #2 14. To program additional remotes, insert each transmitter in the pocket until a beep is heard and the DIC advances to the next electronic key number. Up to four remotes can be programmed. The DIC dislpays Maximum # Electronic Keys Learned and exits the programming mode. 15. Press the ignition control knob if programming is complete. 16. Press unlock on each newly programmed remote to complete the process. Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say previously loved. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not r More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $109.77
    (In stock)
     

    4 Button Rubber Pad Insert For A Key Fob Car Remote Case GM Chevrolet Buick Olds

    This Key FOB fits many vehicles. Please see 'compatible vehicles' for list of compatible vehicles. Your vehicle may not be listed in the compatible vehicles however if the part number and fcc id number match your current remote then then it will work with your vehicle. If you have any questions please call 402-671-5100 There is some leg work you need to do before you purchase. Please read 'Read Before You Purchase' tab above before you purchase! Please also note you will need to program the remote to your vehicle. This can be done by researching the internet 'programming key fob' or taking to your local dealership. Self programming is not difficult. Also note that most key fobs have some wear on them. Also, if there is a metal key, it is cut and a new metal key will need to be cut. Batteries sold separately. 100% Money Back Guarantee! 4 BUTTON GM RUBBER PAD | Cadillac | GM Chevy Chevrolet Buick Oldsmobile | | | GMC | More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $8.95
    (In stock)
     

    JIMS Remote Start Button

    Use on all motorcycles with access to starter positive post terminal and motor post negative terminal Easy to activate the starter and rotate the engine without starting white/black One Size Fits Most JIMS Remote Start Button Great for gifting during the holiday season. More Info
    Seller: J&P CyclesUse on all motorcycles with access to starter positive post terminal and motor post negative termina
    $41.99
    (In stock)
     

    25836192 Factory OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) GM 3 Button keyless entry remote, aka key fob. OEM electronics in a new aftermarket case. Compatibility GM 2014 Buick Enclave 2014 Chevrolet Captiva Sport 2014 Chevrolet Express 2014 Chevrolet Silverado 2014 Chevrolet Suburban 2014 Chevrolet Tahoe 2014 Chevrolet Traverse 2014 GMC Acadia 2014 GMC Sierra 2014 GMC Savana 2014 GMC Yukon 2013 Buick Enclave 2013 Chevrolet Avalanche 2013 Chevrolet Captiva Sport 2013 Chevrolet Express 2013 Chevrolet Silverado 2013 Chevrolet Suburban 2013 Chevrolet Tahoe 2013 Chevrolet Traverse 2013 GMC Acadia 2013 GMC Sierra 2013 GMC Savana 2013 GMC Yukon 2012 Buick Enclave 2012 Chevrolet Avalanche 2012 Chevrolet Captiva Sport 2012 Chevrolet Express 2012 Chevrolet Silverado 2012 Chevrolet Suburban 2012 Chevrolet Tahoe 2012 Chevrolet Traverse 2012 GMC Acadia 2012 GMC Sierra 2012 GMC Savana 2012 GMC Yukon 2011 Buick Enclave 2011 Chevrolet Avalanche 2011 Chevrolet Express 2011 Chevrolet Silverado 2011 Chevrolet Suburban 2011 Chevrolet Tahoe 2011 Chevrolet Traverse 2011 GMC Acadia 2011 GMC Sierra 2011 GMC Savana 2011 GMC Yukon 2010 Buick Enclave 2010 Chevrolet Avalanche 2010 Chevrolet Express 2010 Chevrolet Silverado 2010 Chevrolet Suburban 2010 Chevrolet Tahoe 2010 Chevrolet Traverse 2010 GMC Acadia 2010 GMC Sierra 2010 GMC Savana 2010 GMC Yukon 2009 Buick Enclave 2009 Chevrolet Avalanche 2009 Chevrolet Equinox 2009 Chevrolet Express 2009 Chevrolet Silverado 2009 Chevrolet Suburban 2009 Chevrolet Tahoe 2009 Chevrolet Traverse 2009 GMC Acadia 2009 GMC Sierra 2009 GMC Savana 2009 GMC Yukon 2009 Hummer H2 2009 Pontiac Torrent 2009 Saturn Outlook 2009 Saturn Vue 2008 Buick Enclave 2008 Chevrolet Avalanche 2008 Chevrolet Equinox 2008 Chevrolet Express 2008 Chevrolet Silverado 2008 Chevrolet Suburban 2008 Chevrolet Tahoe 2008 GMC Acadia 2008 GMC Sierra 2008 GMC Savana 2008 GMC Yukon 2008 Hummer H2 2008 Pontiac Torrent 2008 Saturn Outlook 2008 Saturn Vue 2007 Chevrolet Avalanche 2007 Chevrolet Equinox 2007 Chevrolet Silverado 2007 Chevrolet Suburban 2007 Chevrolet Tahoe 2007 GMC Acadia 2007 GMC Sierra 2007 GMC Yukon 2007 Pontiac Torrent 2007 Saturn Outlook 2006 Chevrolet Equinox Programming NOTE: 2O11 & newer vehicles must be programmed by an automotive locksmith or dealership. Saturn vehicles must also be programmed by a professional. PROCEDURE #1 THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i. 1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine) 2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed. 3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode. 4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming. 5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes. 6. To exit programming mode turn ignition OFF, remove key and test all remotes. PROCEDURE #2 THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER. 1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine). 2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed. 3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays. 4. Press and hold LOCK and UNLOCK buttons at the same time on first re More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $27.77
    (In stock)
     

    DIRECTED ELECTRONICS 570T Remote Start Hornet Remote Starter

    DIRECTED ELECTRONICS 570T Remote Start Hornet Remote Starter DIRECTED ELECTRONICS 570TRemote Start Hornet Remote Starter More Info
    Manufacturer: : Directed
    Seller: Autoplicity
    $41.95
    (In stock)
     

    28268ZT NISSAN Factory OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) Nissan 3 Button keyless entry remote, aka key fob. OEM electronics in a new aftermarket case. Compatibility Nissan 2016 Nissan Frontier 2016 Nissan NV 2016 Nissan NV200 2016 Nissan Xterra 2015 Nissan Frontier 2015 Nissan NV 2015 Nissan NV200 2015 Nissan Titan 2015 Nissan Xterra 2014 Nissan Frontier 2014 Nissan NV 2014 Nissan Titan 2014 Nissan Xterra 2013 Nissan Frontier 2013 Nissan NV 2013 Nissan Titan 2013 Nissan Xterra 2012 Nissan Frontier 2012 Nissan NV 2012 Nissan Pathfinder 2012 Nissan Titan 2012 Nissan Versa 2012 Nissan Xterra 2011 Nissan Frontier 2011 Nissan Pathfinder 2011 Nissan Titan 2011 Nissan Versa 2011 Nissan Xterra 2010 Nissan Frontier 2010 Nissan Pathfinder 2010 Nissan Titan 2010 Nissan Versa 2010 Nissan Xterra 2009 Nissan Frontier 2009 Nissan Pathfinder 2009 Nissan Versa 2009 Nissan Xterra 2008 Nissan Frontier 2008 Nissan Pathfinder 2008 Nissan Versa 2008 Nissan Xterra 2007 Nissan Frontier 2007 Nissan Pathfinder 2007 Nissan Versa 2007 Nissan Xterra 2006 Nissan Frontier 2006 Nissan Pathfinder 2006 Nissan Xterra 2005 Nissan Frontier 2005 Nissan Pathfinder 2005 Nissan Xterra Programming Most remotes can be self-programmed. If this procedure does not work, you must have your remote programmed by a professional automotive locksmith or dealership. Note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive. Close and lock all doors with the driver's side power lock / unlock switch located on drivers door panel. Insert key into ignition (DON'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode. Insert key into ignition and turn to the ACC position. Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes). When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver's side power lock/unlock switch and open the driver side door. Test all remotes. Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say previously loved. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world! More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $19.77
    (In stock)
     

    Dema 81-245-1 Two Button Remote Programmer

    Designed for use with Olympian mini pumps and 8400 Top Shot pumps, this Dema 81-245-1 chemical dispenser two button remote programmer is required for the initial set up of your Olympian and Top Shot chemical dispensers. While this programmer is an additional purchase, only one is required and it can later be used interchangeably with other compatible chemical dispensing pumps. A single programmer can be used to set up as many chemical dispensers as you need. Overall Dimensions: Length: 2 1/2 Width: 1 1/2 Height: 1/2 Cord Length: 20 81.245.1 From Dema More Info
    Seller: WebstaurantStoreIn Stock
    $30.99
    (In stock)
     

    15114376 6 BUTTON Factory OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) GM 6 Button keyless entry remote, aka key fob. OEM electronics in a new aftermarket case. Compatibility GM 2009 Chevrolet Uplander 2009 Pontiac Montana 2008 Chevrolet Uplander 2008 Pontiac Montana 2007 Buick Terraza 2007 Chevrolet Uplander 2007 Pontiac Montana 2007 Saturn Relay 2006 Buick Terraza 2006 Chevrolet Uplander 2006 Pontiac Montana 2006 Saturn Relay 2005 Buick Terraza 2005 Chevrolet Uplander 2005 Pontiac Montana 2005 Saturn Relay Programming Most remote programming must be done by a professional automotive locksmith or dealership. Programming for 2006 Pontiac Montana Obtain all remote transmitters for this vehicle. 1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door. Programming for 2005 Pontiac Montana Obtain all remote transmitters for this vehicle. 1. Remove key from ignition. 2. Remove the BCM PRGRM fuse from fuse box. You will need to open the passenger door to access the panel. Use the fuse chart to properly identify the BCM PRGRM fuse. 3. Close all doors. 4. Insert key and turn ignition switch to ACC. (ACC is turning the key back toward you). 5. Within 1 second turn the ignition to OFF then back to ACC. (OFF is the position where you can remove your key). 6. Open then close any door. 7. An acoustic sound will be heard after closing the door indicating the vehicle is in programming mode. 8. Hold the LOCK and UNLOCK buttons on the remote for about 15 seconds until two chimes are heard. You may hear a chime after about 5 seconds but you must wait about 15 seconds for a second chime. That remote is now programmed. 9. Repeat step 8 for any additional remotes including working ones. 10. Remove key from ignition and replace BCM PRGRM fuse. 11. Test all remotes. Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say previously loved. We recycle OEM key fobs and put them through a rigorous re More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $37.77
    (In stock)
     

    10245952 Factory OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) GM 3 Button keyless entry remote, aka key fob. Compatibility GM 2000 Chevrolet Venture 2000 Oldsmobile Silhouette 2000 Pontiac Montana 1999 Chevrolet Venture 1999 Oldsmobile Silhouette 1999 Pontiac Montana 1999 Pontiac Trans Sport 1998 Chevrolet Venture 1998 Oldsmobile Silhouette 1998 Pontiac Trans Sport 1997 Chevrolet Venture 1997 Oldsmobile Silhouette 1997 Pontiac Trans Sport Programming Note:There are two possible procedures. If the first procedure does not work, please try the second procedure. Procedure #1 Obtain all remote transmitters for this vehicle. Remove key from ignition. Remove the BCM PRGRM fuse from fuse box. You will need to open the passenger door to access the panel. Use the fuse chart to properly identify the BCM PRGRM fuse. Close all doors. Insert key and turn ignition switch to ACC. (ACC is turning the key back toward you). Within 1 second turn the ignition to OFF then back to ACC. (OFF is the position where you can remove your key). Open then close any door. An acoustic sound will be heard after closing the door indicating the vehicle is in programming mode. Hold the LOCK and UNLOCK buttons on the remote for about 15 seconds until two chimes are heard. You may hear a chime after about 5 seconds but you must wait about 15 seconds for a second chime. That remote is now programmed. Repeat step 8 for any additional remotes including working ones. Remove key from ignition and replace BCM PRGRM fuse. Test all remotes. Procedure #2 Obtain all remote transmitters for this vehicle. Remove key from ignition. Remove the MALL PGM/BCM PGM fuse from fuse box. Close all doors. Turn ignition switch to ACC. (ACC is turning the key back toward you). Within 1 second turn the ignition to OFF then back to ACC. (OFF is the position where you can remove your key) Open then close the drivers door. An acoustic sound will be heard after closing the door indicating the vehicle is in programming mode. Hold the LOCK and UNLOCK buttons on the remote for about 15 seconds until two chimes are heard. Repeat step 8 for any additional remotes including working ones. Remove key from ignition and replace MALL PGM fuse. Test all remotes. Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say previously loved. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world! More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $15.77
    (In stock)
     

    Car Vehicle Alarm Protection Security System Keyless Entry Siren Remote Control-Car Alarm System

    Car Vehicle Alarm Protection Security System Keyless Entry Siren Remote Control Feature: 1. Remote arm / disarm 2. Remote silent alarm 3. Remote trunk release 4. Anti-hijacking 5. Power off memory 6. LED indicator status 7. Urgent disarm / urgent call 8. Car finding / help calling 9. Central door lock automation 10. Door unlocked well warning 11. Electronic lock / pneumatic lock 12. Positive / negative trigger optional 13. Remote control and Main unit match code: When a remote control is lost or out of work, you can re-learn the code. (Method: open the side door, slam the foot brake, directional lights flashing, open ACC.ON-OFF(five times),and stopped in the open position, directional lights stop flashing. At this time, press any key on the remote control to learn code. speaker calls out, indicating success in learning.) Specification: Main Unit: 1. Voltage: 12V+/-3V 2. Static current: 10mA 3. Output current: turning light 7.5A x 2 4. LED Indicator:3mA 5. Siren:10A 6. Central locking:10A 7. Operating frequency: 315MHz-433.92 MHZ Remote Control: 1. Voltage: 12V 2. Static current: 0mA 3. Battery:CR2016(Included) Shock Sensor: 1. Working voltage:DC12+/-3V 2. Static current:1mA Package Included: 1 X Main Control Unit 1 X LED Connection Wire 1 X Engine Killer Relay 1 X Shock Sensor 1 X Wiring Set 1 X English User Manual 1 X Siren 2 X Remote Control More Info
    Seller: BanggoodBig Bang For Your Buck, Free Shipping!
    $28.99
    (In stock)
     

    15100811 Factory 3 BUTTON OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) GM 3 Button keyless entry remote, aka key fob. OEM electronics in a new aftermarket case. Compatibility GM 2007 Saturn Relay 2006 Buick Terraza 2006 Chevrolet HHR 2006 Chevrolet Uplander 2006 Pontiac Montana 2005 Buick Terraza 2005 Chevrolet Uplander 2005 Pontiac Montana 2005 Saturn Relay Programming Most remote programming must be done by a professional automotive locksmith or dealership. Programming for 2006 Pontiac Montana Obtain all remote transmitters for this vehicle. 1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.Programming for 2005 Pontiac Montana Obtain all remote transmitters for this vehicle. 1. Remove key from ignition. 2. Remove the BCM PRGRM fuse from fuse box. You will need to open the passenger door to access the panel. Use the fuse chart to properly identify the BCM PRGRM fuse. 3. Close all doors. 4. Insert key and turn ignition switch to ACC. (ACC is turning the key back toward you). 5. Within 1 second turn the ignition to OFF then back to ACC. (OFF is the position where you can remove your key). 6. Open then close any door. 7. An acoustic sound will be heard after closing the door indicating the vehicle is in programming mode. 8. Hold the LOCK and UNLOCK buttons on the remote for about 15 seconds until two chimes are heard. You may hear a chime after about 5 seconds but you must wait about 15 seconds for a second chime. That remote is now programmed. 9. Repeat step 8 for any additional remotes including working ones. 10. Remove key from ignition and replace BCM PRGRM fuse. 11. Test all remotes. Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say previously loved. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of yo More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $38.77
    (In stock)
     

    25550780 BUICK Factory OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) Buick 3 Button keyless entry remote, aka key fob. Compatibility Buick 2000 Buick Century 2000 Buick Park Avenue 1999 Buick Century 1999 Buick Park Avenue 1998 Buick Century 1998 Buick Park Avenue 1997 Buick Century 1997 Buick Park Avenue 1996 Buick Century 1996 Buick Park Avenue 1995 Buick Century 1995 Buick Park Avenue 1994 Buick Century 1994 Buick Park Avenue 1993 Buick Century 1993 Buick Park Avenue 1992 Buick Century 1992 Buick Park Avenue 1991 Buick Century 1991 Buick Park Avenue Programming Most remotes can be self-programmed. If these procedures do not work, you must have your remote programmed by a professional automotive locksmith or dealership. Procedure #1 (97-00 Buick Century) Obtain all remote transmitters for this vehicle. 1. Close vehicle door. 2. Turn ignition to ON then back to OFF (ON is the position just shy of starting car without cranking engine) 3. Remove key from ignition. 4. Press and hold the UNLOCK switch on drivers door and continue to hold until instructed to release. 5. Insert key into the ignition (do not turn it) and remove it. 6. Insert key into the ignition (do not turn it) and remove it. 7. Insert key into the ignition (do not turn it) and leave it in. 8. Release the UNLOCK switch on drivers door. Vehicle will respond with three acoustic sounds to indicate successful entry into programming mode. 9. Press and hold the LOCK and UNLOCK buttons on first remote until vehicle beeps twice indicating successful programming. This step may take about 15 seconds. 10. Repeat step 9. for all remaining remotes including working ones. 11. Remove key from ignition to exit programming mode and test all remotes. Procedure #2 (94-99 Buick Park Avenue) Obtain all remote transmitters for this vehicle. 1. Locate the Data Link Port. It is located under drivers side dash. You may need to lay on the floor and look up under the dash to see it. Be sure you know which ports are 8 and 4. Notice the port is wider on the top row. If you are looking at the port with the wide row on top and the narrow row on bottom, Port 1 will be in the upper left corner and port 8 in the upper right corner. Be sure there are metal pins inside ports 8 and 4. Please refer to the diagram above to locate the proper pins. The numbers are not on the connector, they are only for reference. 2. Connect pin 8 to pin 4 with a suitable jumper wire. Any short piece of wire will work fine. A paper clip bent in the shape of a U will work perfect. (leave the jumper wire connected throughout the programming procedure). 3. Insert key into the ignition and turn the ignition cylinder to the ON position. The vehicle will respond by locking and unlocking the doors to indicate vehicle has entered programming mode. 4. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed. After about 15 seconds, the vehicle will respond by locking and unlocking the doors. Release the buttons on the remote. 5. Within one minute, repeat step 4 on all additional remotes including working ones to be programmed. 6. Remove the jumper wire connected to the Data Link Port. Procedure #3 (93-96 Buick Century) Obtain all remote transmitters for this vehicle. 1. Access green programming connector in LH side of trunk (drivers side). Programming connector will not be connected to anything. It will have a plug on the end of it with two holes in it or ports. 2. Jump programming connector using a suitable jumper wire. Jumping the connector means to use a wire or paperclip bent in the shape of a U to make a connection between the two ports. Be sure you are making contact with the metal inside both ports. 3. System should now lock and unlock doors and activate trunk release to indicate successful entry into programming mode. 4. Press any button on remote one More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $24.77
    (In stock)
     

    CWT72147KA ACURA Factory OEM KEY FOB Keyless Entry Car Remote Alarm Replace

    This is a Factory OEM (Original Equipment Manufacturer) Acura 4 Button keyless entry remote, aka key fob. Compatibility Acura 2001 Acura RL 2000 Acura RL 1999 Acura RL 1998 Acura RL 1997 Acura RL 1996 Acura RL Programming Obtain all remote transmitters for this vehicle and read the instructions prior to programming. Entering programming mode will erase all previously programmed remotes for this vehicle. You must have all remotes available for programming including working ones. Enter vehicle and close all doors Each of the following steps must be completed within five seconds of completing the previous step. If you take longer than five seconds or make a mistake, you must start the entire procedure over. Insert the key into the ignition, hold one remote in your left hand with additional remotes close by. We recommend taking remotes off the key ring to perform the procedure. When the instructions say to press the LOCK button, you should press the LOCK button on the remote for approximately one second then release it. Perform each of the next three steps in order, then repeat all three steps two more times for a total of three times each. Turn the ignition to the ON position, marked II. Press the LOCK button on the remote. Turn the ignition to the OFF position, marked I. (Do steps 1-3 three times) Next, turn the ignition switch to ON position, marked II. 4. Using the same remote, press the LOCK button again. The door locks should cycle indicating the vehicle has ENTERED programming mode. 5. Using the same remote, press the LOCK button again. The door locks should cycle indicating the vehicle has PROGRAMMED that remote. If you have other remotes to program then repeat step 5 with each additional remote one after another. Step 5 must be completed within ten seconds for each additional remote. You may program up to three remotes. 6. Turn the ignition to OFF. Test all remotes. If your remote has a trunk button you will need to hold that button down for several seconds for that function to operate. Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say previously loved. We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world! More Info
    Manufacturer: : SMART
    Seller: Keyless Entry RemoteFree Shipping with a minimum of order of $25
    $37.77
    (In stock)
     

    Genuine Volkswagen Audi Remote Transmitter - Priced Each: Commonly referred to as the 'key fob' ...

    The remote transmitter is a convenient feature to any vehicle, as it allows you to lock and unlock the doors with the press of a button. Over the years, the buttons on the key fob can become inoperative from use or the casing may start to become brittle and break apart. Don't leave your keys as the only way to lock/unlock your vehicle, pick up a new remote transmitter today.*Programming may be required for function with your vehicle. Fits: Audi A4 FWD 1.8T, Audi A4 FWD V6 12v, Audi A4 FWD V6 30v, Audi A4 Quattro 1.8T, Audi A4 Quattro V6 12v, Audi A4 Quattro V6 30v. More Info
    Manufacturer: : Volkswagen
    Seller: ECS Tuning
    $129.72
    (In stock)